Premium Tile Adhesive
TELLABOND PLATINUM
TELLABOND PLATINUM
Tellabond Platinum is a superior tile adhesive with non-shrink particles that provides high bond strength.
Tellabond Master is a premium tile adhesive with high bond strength. It is enriched with special active polymers and is a polymer-modified, grey cement-based thin-set tile adhesive for fixing high porosity tiles like ceramic and clay tiles, terracotta, and quarry tiles of all sizes.
It is non-shrink in nature with high bond strength which creates perfect bonding strength for fixing high porosity tiles like ceramic or clay tiles, terracotta, and quarry tiles of all sizes. They are perfect for different kinds of surfaces on all floors and walls. Works very well for tile-on-tile application for most repair and rehabilitation work.
Features & Benefits
 | High bonding strength with better adhesive |  | Zero wastage & easy to apply |  | Economical & time saving |
 | High water resistance & ease of application |  | Non shrink & adhesion properties |  | Fast setting & superior peel-off strength |
Tellabond Platinum Advantages
ORDINARY TILE ADHESIVE | TELLABOND PLATINUM |
|---|---|
⛔ Slow fixing | ✅ Faster fixing |
⛔ Curing required | ✅ Curing not required |
⛔ Poor workability | ✅ Good workability |
⛔ Typical application | ✅ Easy to apply |
⛔ Short open time & adjustability | ✅ Adequate open time & adjustability |
⛔ Poor water retension | ✅ Good water retension |
⛔ Very low bond strength | ✅ High bond strength |
⛔ Hollowness problems | ✅ No hollowness between tile & substrate |
⛔ Requires bed thickness 20-30mm | ✅ 3-6mm thickness adequate mostly |
⛔ Adds more weight & thickness | ✅ Reduced weight & thickness of structure |
⛔ Not water resistant | ✅ Water resistant |
⛔ Chipping required | ✅ Can be used directly on any surface |
⛔ Stains, seepage & discolouration is possible | ✅ Resistance to stains, seepage & discolouration |
Technical Information
Parameter | Results |
|---|---|
Appearance | Cementitious Free Flow Grey Powder |
Pot Life | >100 Minutes |
Open Time, Minutes | 15-20 |
Adjustibility | 20 Minutes |
Slip Test | ≤ 0.5 mm |
Coverage | 2.85 - 3.00 sq. ft./kg |
Quality & Standards
Tensile Adhesion
(Dry Conditions)
Shear Adhesion
(Dry Conditions 24 Hrs.)
Tensile Adhesion
(Wet Conditions)
Shear Adhesion
(Dry Conditions 14 Hrs.)
Exceeds the requirements of IS 15477:2019 Type 1T
Complies to requirements of ANSI A118.1T and EN/ISO: C1T
Shear Adhesion
(Heat Ageing Conditions)
Shear Adhesion
(Wet Conditions)
Health & Safety Precautions
-
Though it contains non toxic materials but still care should be taken to avoid dust inhalation while mixing and handling
-
People allergic to cement products should take precautions before use
-
In case of contact with eyes wash with plenty of water
-
Keep out of reach of children
Method of Application
